When a well pump runs but no water comes out, look at the pressure gauge before anything else. It sits on the pipe by your tank. A reading of zero means the water never leaves the well. A normal reading with dry taps means the problem is between the tank and the house. Those are two very different repairs.
Austin Drilling has worked on South Carolina wells since 1960. Here's how we read that gauge ourselves.
Why is my well pump running but no water is coming out?
Something is breaking the path from the water to your faucet. A motor can spin with no water moving. So the running sound tells you little. The gauge tells you where the break is.
One customer wrote us after a storm cut the lights. They primed the pump, the gauge held around 45 psi, and the house still had no water. That reading tells us a lot already. The pump built pressure, so we look past the tank.
What does it mean if the gauge reads zero?
The pump runs but isn't lifting water. On a jet pump, the most common cause is a lost prime. Air got into the suction line. Now the pump can't pull water. Our page on well pump losing prime walks through why that happens.
On a submersible pump, zero usually points down the well. The pipe may have split or come loose. The impeller might be worn out. Or the water level may have dropped below the pump, which we see in dry SC summers. If that sounds familiar, read about a well running dry.
What if the gauge shows pressure but the taps are dry?
Then the well is probably doing its job. Look between the tank and the house. A closed valve after the tank does it. So will a clogged whole-house sediment filter, which is common with iron and sand. A plugged fitting at the tank tee can also stop the flow.
Check whether someone closed a valve during recent work. Check your filter cartridge if you have one. If both look fine, call us before you start opening lines.
What if you only hear a hum?
A hum with no water is usually electrical. The motor gets power but can't turn. A failed start capacitor or a burned control box can cause that, especially after a lightning storm. Don't open the control box yourself. It carries enough voltage to hurt you badly. Our page on a well pump not working after a power outage covers storm damage in more detail.
How long can a well pump run without water?
Not long enough to wait it out. Water keeps the pump and motor cool. A dry pump heats up very fast. It can ruin itself in that time. If the pump is running and the gauge isn't moving, turn it off at the breaker. That one step can save a pump.
What should you do right now?
Read the gauge and write it down. Note whether the pump runs, hums or clicks. Shut it off at the breaker if no water is moving. Then call Austin Drilling and we'll get your water back on.
Most well problems we see get diagnosed in one visit. Everything we replace carries a 5-year warranty. Our well repair service page explains how we work. If the pump won't stop running at all, see well pump won't shut off.
Call West Columbia at (803) 926-5402 or Newberry at (803) 926-7080. We're open Monday through Friday, 7am to 6pm, and Saturday by appointment.
Frequently asked questions
Why does my well pump run when no water is being used?
Something is letting pressure bleed off. It might be a running toilet, a leaking line or a check valve that no longer holds. A pump that never rests needs a look.
Why is my pump running but not pulling water?
A jet pump has usually lost its prime. A submersible may have a broken pipe, a worn impeller or a low water level.
How do you test a well pump without pulling it?
We watch the gauge, check the electrical readings at the control box and listen to the pump. That usually tells us whether the pump has to come out.
Can Austin Drilling fix a well pump that runs but gives no water?
Yes, and we start by reading the gauge. Austin Drilling handles well pump runs but no water calls across the SC Midlands and Upstate from West Columbia and Newberry.
Talk to a Real Well Company
66 years, 13,000+ wells, in-house crews across the SC Midlands and Upstate. Call Austin Drilling and we'll get your water right.
Related Reading
Well Problems? Give Us a Call.
We've been diagnosing and fixing SC wells since 1960. Call us or request your free water analysis β no obligation.